st-pti: tethering
Subject:
Re: [st-pti] tethering
From:
Grzes Plucinski ####@####.####
Date:
8 Jan 2016 19:51:04 +0000
Message-Id: <56901363.6030107@grzes.com>
W dniu 2016-01-08 o 20:40, Marcin Cieslak pisze:
> On Fri, 8 Jan 2016, Grzes Plucinski wrote:
>
>> W dniu 2016-01-08 o 19:59, Andrzej Dyżewski, pt pisze:
>>
>> ale po co tworzyć nowe pojęcie ?
>> telefon robi za modem i tak się to przez lata nazywało
>> modemy przez lata bywały różne - ale zawsze pozostawało to modemem
> W tym przypadku telefon nie jest tylko modemem, tylko połączeniem
> modem + router + punkt dostępowy sieci bezprzewodowej WLAN
> albo urządzenie USB udające ethernet.
ależ dokładnie jest modemem - moje WINDOWS-y nawet piszą, że to modem
urządzenie bluetooth czy USB przedstawia się sprzętowo jako modem
u mnie dla tego modemu generuje się port COM7
inaczej jest przy WiFi wtedy telefon to "access-point" czyli
"punkt-dostępu"
ale dalej i tak dalej jest modem
z połączeniem "dial-up"
co więcej nawet jest wybierany numer telefonu połączenia (*99***1# lub *99#)
/i na typ połączeniu uruchamiane jest TCPIP - ppp - ale to już wyższa
warstwa
/
>
> M
>
> ---
> ST-PTI. Lista dyskusyjna Sekcji Terminologicznej PTI.
> Archiwum publiczne listy: http://lists.tldp.org/go.to?list=st-pti
> ---
>
>
--
Albert Einstein powiedział kiedyś, ''Arkę zbudowali amatorzy, a fachowcy... Titanica''.
Dopóki nie skorzystałem z Internetu, nie wiedziałem, że na świecie jest tylu idiotów - S. Lem
-----------------------
niniejsza wiadomość jest podpisana cyfrowo kluczem PGP
autentyczność podpisu można potwierdzić pobierając klucz publiczny z adresu:
http://www.mainframe.pl/doc/klucze/0xC2C97382.key
--> -->
<type 'exceptions.IOError'> | Python 2.5.2: /usr/bin/python Mon May 13 08:49:21 2024 |
A problem occurred in a Python script. Here is the sequence of
function calls leading up to the error, in the order they occurred.
/opt/ezmlm-browse-0.20/main.py in main() |
424
|
425 if path is not None:
|
426 main_path(path)
|
427 else:
|
428 main_form()
|
global main_form = <function main_form at 0x99c3c6c> |
/opt/ezmlm-browse-0.20/main.py in main_form() |
378 except ImportError:
|
379 die(ctxt, "Invalid command")
|
380 module.do(ctxt)
|
381
|
382 def main():
|
module = <module 'commands.showmsg' from '/opt/ezmlm-browse-0.20/commands/showmsg.pyc'>, module.do = <function do at 0x9a23144>, global ctxt = {'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'} |
/opt/ezmlm-browse-0.20/commands/showmsg.py in do(ctxt={'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}) |
18 write(html('msg-pager') % ctxt)
|
19 write('<hr>')
|
20 sub_showmsg(ctxt, ctxt[MSGNUM])
|
21 write('<hr>')
|
22 write(html('msg-pager') % ctxt)
|
global sub_showmsg = <function sub_showmsg at 0x99c31ec>, ctxt = {'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, global MSGNUM = 'msgnum' |
/opt/ezmlm-browse-0.20/globalfns.py in sub_showmsg(ctxt={'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msgnum=686) |
229 format_timestamp(ctxt, ctxt)
|
230 write(html('msg-header') % ctxt)
|
231 rec_showpart(ctxt, msg, 0)
|
232 write(html('msg-footer') % ctxt)
|
233 ctxt.pop()
|
global rec_showpart = <function rec_showpart at 0x99c31b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msg = <email.message.Message instance at 0x9a24fac> |
/opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9a24fac>, partnum=4) |
205 else:
|
206 for p in part.get_payload():
|
207 partnum = rec_showpart(ctxt, p, partnum+1)
|
208 else:
|
209 write(html('msg-sep') % ctxt)
|
partnum = 4, global rec_showpart = <function rec_showpart at 0x99c31b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, p = <email.message.Message instance at 0x9a225cc> |
/opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9a225cc>, partnum=5) |
208 else:
|
209 write(html('msg-sep') % ctxt)
|
210 sub_showpart(ctxt, part)
|
211 return partnum
|
212
|
global sub_showpart = <function sub_showpart at 0x99c3144>, ctxt = {'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part = <email.message.Message instance at 0x9a225cc> |
/opt/ezmlm-browse-0.20/globalfns.py in sub_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 4, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9a225cc>) |
164 type = ctxt[TYPE] = part.get_content_type()
|
165 ctxt[FILENAME] = part.get_filename()
|
166 template = html('msg-' + type.replace('/', '-'))
|
167 if not template:
|
168 template = html('msg-' + type[:type.find('/')])
|
global template = <function template at 0x99bbe9c>, global html = <function html at 0x99bbed4>, type = 'application/pgp-signature', type.replace = <built-in method replace of str object at 0x9a237c8> |
/opt/ezmlm-browse-0.20/globalfns.py in html(name='msg-application-pgp-signature') |
40
|
41 def html(name):
|
42 return template(name + '.html')
|
43
|
44 def xml(name):
|
global template = <function template at 0x99bbe9c>, name = 'msg-application-pgp-signature' |
/opt/ezmlm-browse-0.20/globalfns.py in template(filename='msg-application-pgp-signature.html') |
31 except IOError:
|
32 if not _template_zipfile:
|
33 _template_zipfile = zipfile.ZipFile(sys.argv[0])
|
34 try:
|
35 f = _template_zipfile.open(n).read()
|
global _template_zipfile = None, global zipfile = <module 'zipfile' from '/usr/lib/python2.5/zipfile.pyc'>, zipfile.ZipFile = <class zipfile.ZipFile at 0x9954a7c>, global sys = <module 'sys' (built-in)>, sys.argv = ['-c', '/opt/ezmlm-browse-0.20'] |
/usr/lib/python2.5/zipfile.py in __init__(self=<zipfile.ZipFile instance at 0x9a1ab8c>, file='-c', mode='r', compression=0, allowZip64=False) |
337 self.filename = file
|
338 modeDict = {'r' : 'rb', 'w': 'wb', 'a' : 'r+b'}
|
339 self.fp = open(file, modeDict[mode])
|
340 else:
|
341 self._filePassed = 1
|
self = <zipfile.ZipFile instance at 0x9a1ab8c>, self.fp = None, builtin open = <built-in function open>, file = '-c', modeDict = {'a': 'r+b', 'r': 'rb', 'w': 'wb'}, mode = 'r' |
<type 'exceptions.IOError'>: [Errno 2] No such file or directory: '-c'
args =
(2, 'No such file or directory')
errno =
2
filename =
'-c'
message =
''
strerror =
'No such file or directory'