discuss: Thread: STRANGE PROBLEM WITH KPPP

Hi guys!!....Im new in the list., so I hope anybody can help me, maybe the
 "answer guy"...ok....I have a strange problem with kppp, ...when I
 make a connection with my ISP, I get the next configuration:


 eth0      Link encap:Ethernet  HWaddr 00:D0:09:48:D1:DB
           inet addr:192.168.0.100  Bcast:192.168.0.255  Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:365 errors:0 dropped:0 overruns:0 frame:0
           TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           Interrupt:11 Base address:0xda00


 lo      Link encap:Local Loopback
         inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
         UP BROADCAST LOOPBACK RUNNING MTU:3584  Metric:1
         RX packets:55  errors:0  dropped:0  overruns:0
         TX packets:55  errots:0  dropped:0  overruns:0

 ppp0    Link encap:Point-Point Protocol
         inet addr:192.168.0.100  P-t-P:200.31.30.34  Mask:255.255.255.255
         UP POINTTOPOINT RUNNING MTU:1500  Metric:1
         RX packets:9  errors:0  dropped:0  overruns:0
         TX packets:10  errors:0  dropped:0  overruns:0


 As you can see, I don t know why the kppp use the ethernet IP (eth0) in 
 the
 field "inet addr" a the ppp0 interface. and of course I cannot navigate......it
 is very strange, because when I use the "wvdial" command to make the same
 connection it works fine, i mean, in the ppp0 s field above it puts the 
 correct
 IP asigned by the ISP. Another thing, I have three ISP, and I have that 
 little
 problem only with one ot them, but with windows 98 dial-up client
 everything is OK....Any suggestion????....What do i do wrong??


 Thanks a lot 

 Alfredo

_____________________________________________________________
PaloSanto.com - Innovating the Internet ---> http://www.palosanto.com