discuss: HOWTO (or Mini-HOWTO) Idea: IPv6 Forwarding
Subject:
Re: HOWTO (or Mini-HOWTO) Idea: IPv6 Forwarding
From:
Charles Curley ####@####.####
Date:
22 Jun 2002 22:48:54 -0000
Message-Id: <20020622164816.B18250@trib.com>
On Sat, Jun 22, 2002 at 10:23:16PM +0200, Hugo van der Kooij wrote:
> On Sat, 22 Jun 2002, David Ranch wrote:
>
> > I've been working with Peter on the IPv6 HOWTO for a little
> > while now.
> >
> > http://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/credits.html
> >
> > Ultimately, standard v6 setup, connectivity, forwarding, etc.
> > should be handled by his HOWTO. Peter is very receptive to
> > ideas, etc. so I would contact him about this.
> >
> > Now, if you are talking about 6to4, NATing, etc., that
> > would come under the IPMASQ howto. Do you have any
> > specific ideas? Please remember that I don't want to
> > get involved with enabling 6Bone connectivity, etc.
> > Again, that would be for Peter's HOWTO.
>
> I would expect 6to4 on the IPv6 howto and not even dream of trying
> to find it in a masquerading howto.
>
> There are possibly other issues that may have an overlap but need to
> be addressed in this howto.
These are what I call "boundary issues" between two related
documents. Where you put a given subheading (such as 6to4 [I assume
that means translation from IPv6 to IPv4]) is less important than that
the other document(s) refer to whichever one gets it in suitable places.
--
Charles Curley /"\ ASCII Ribbon Campaign
Looking for fine software \ / Respect for open standards
and/or writing? X No HTML/RTF in email
http://w3.trib.com/~ccurley / \ No M$ Word docs in email
--> -->
<type 'exceptions.IOError'> | Python 2.5.2: /usr/bin/python Wed Jul 3 15:12:19 2024 |
A problem occurred in a Python script. Here is the sequence of
function calls leading up to the error, in the order they occurred.
/opt/ezmlm-browse-0.20/main.py in main() |
424
|
425 if path is not None:
|
426 main_path(path)
|
427 else:
|
428 main_form()
|
global main_form = <function main_form at 0x8fd8c6c> |
/opt/ezmlm-browse-0.20/main.py in main_form() |
378 except ImportError:
|
379 die(ctxt, "Invalid command")
|
380 module.do(ctxt)
|
381
|
382 def main():
|
module = <module 'commands.showmsg' from '/opt/ezmlm-browse-0.20/commands/showmsg.pyc'>, module.do = <function do at 0x8fe0ae4>, global ctxt = {'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'} |
/opt/ezmlm-browse-0.20/commands/showmsg.py in do(ctxt={'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}) |
18 write(html('msg-pager') % ctxt)
|
19 write('<hr>')
|
20 sub_showmsg(ctxt, ctxt[MSGNUM])
|
21 write('<hr>')
|
22 write(html('msg-pager') % ctxt)
|
global sub_showmsg = <function sub_showmsg at 0x8fd81ec>, ctxt = {'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, global MSGNUM = 'msgnum' |
/opt/ezmlm-browse-0.20/globalfns.py in sub_showmsg(ctxt={'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msgnum=3265) |
229 format_timestamp(ctxt, ctxt)
|
230 write(html('msg-header') % ctxt)
|
231 rec_showpart(ctxt, msg, 0)
|
232 write(html('msg-footer') % ctxt)
|
233 ctxt.pop()
|
global rec_showpart = <function rec_showpart at 0x8fd81b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msg = <email.message.Message instance at 0x9035d2c> |
/opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9035d2c>, partnum=1) |
205 else:
|
206 for p in part.get_payload():
|
207 partnum = rec_showpart(ctxt, p, partnum+1)
|
208 else:
|
209 write(html('msg-sep') % ctxt)
|
partnum = 1, global rec_showpart = <function rec_showpart at 0x8fd81b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, p = <email.message.Message instance at 0x9035f2c> |
/opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9035f2c>, partnum=2) |
208 else:
|
209 write(html('msg-sep') % ctxt)
|
210 sub_showpart(ctxt, part)
|
211 return partnum
|
212
|
global sub_showpart = <function sub_showpart at 0x8fd8144>, ctxt = {'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part = <email.message.Message instance at 0x9035f2c> |
/opt/ezmlm-browse-0.20/globalfns.py in sub_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 5, 'HTTP_X_FORWA...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x9035f2c>) |
164 type = ctxt[TYPE] = part.get_content_type()
|
165 ctxt[FILENAME] = part.get_filename()
|
166 template = html('msg-' + type.replace('/', '-'))
|
167 if not template:
|
168 template = html('msg-' + type[:type.find('/')])
|
global template = <function template at 0x8fd0e9c>, global html = <function html at 0x8fd0ed4>, type = 'application/pgp-signature', type.replace = <built-in method replace of str object at 0x903c1e0> |
/opt/ezmlm-browse-0.20/globalfns.py in html(name='msg-application-pgp-signature') |
40
|
41 def html(name):
|
42 return template(name + '.html')
|
43
|
44 def xml(name):
|
global template = <function template at 0x8fd0e9c>, name = 'msg-application-pgp-signature' |
/opt/ezmlm-browse-0.20/globalfns.py in template(filename='msg-application-pgp-signature.html') |
31 except IOError:
|
32 if not _template_zipfile:
|
33 _template_zipfile = zipfile.ZipFile(sys.argv[0])
|
34 try:
|
35 f = _template_zipfile.open(n).read()
|
global _template_zipfile = None, global zipfile = <module 'zipfile' from '/usr/lib/python2.5/zipfile.pyc'>, zipfile.ZipFile = <class zipfile.ZipFile at 0x8f69a7c>, global sys = <module 'sys' (built-in)>, sys.argv = ['-c', '/opt/ezmlm-browse-0.20'] |
/usr/lib/python2.5/zipfile.py in __init__(self=<zipfile.ZipFile instance at 0x9035f6c>, file='-c', mode='r', compression=0, allowZip64=False) |
337 self.filename = file
|
338 modeDict = {'r' : 'rb', 'w': 'wb', 'a' : 'r+b'}
|
339 self.fp = open(file, modeDict[mode])
|
340 else:
|
341 self._filePassed = 1
|
self = <zipfile.ZipFile instance at 0x9035f6c>, self.fp = None, builtin open = <built-in function open>, file = '-c', modeDict = {'a': 'r+b', 'r': 'rb', 'w': 'wb'}, mode = 'r' |
<type 'exceptions.IOError'>: [Errno 2] No such file or directory: '-c'
args =
(2, 'No such file or directory')
errno =
2
filename =
'-c'
message =
''
strerror =
'No such file or directory'