discuss: [tfox@redhat.com: HOWTO doc's in 7.3]


Previous by date: 12 May 2002 18:54:17 -0000 Re: [tfox@redhat.com: HOWTO doc's in 7.3], David Lawyer
Next by date: 12 May 2002 18:54:17 -0000 Re: Dealing with poor maintenance by maintainers, Sayamindu Dasgupta
Previous in thread: 12 May 2002 18:54:17 -0000 Re: [tfox@redhat.com: HOWTO doc's in 7.3], David Lawyer
Next in thread: 12 May 2002 18:54:17 -0000 Re: [tfox@redhat.com: HOWTO doc's in 7.3], Hal Burgiss

Subject: Re: [tfox@redhat.com: HOWTO doc's in 7.3]
From: Charles Curley ####@####.####
Date: 12 May 2002 18:54:17 -0000
Message-Id: <20020512125338.A2569@trib.com>

On Sun, May 12, 2002 at 11:13:15AM -0700, David Lawyer wrote:
> > > On Thu, May 09, 2002 at 07:28:42PM +0000, Trond Eivind Glomsr?d wrote:


> > 
> > Something that might help both the distributors and the LDP is for the
> > distributors to put someone in their documentation department in
> > charge of liaison with the LDP, and part of their duties is to bring
> > problems like this to LDP's attention.
> > 
> > I am not very senior around here (I released a HOWTO in January) but
> > if the Powers That Be (PTB) would like, I'll take on the second
> > proposal. I'll ask the LDP PTBs to appoint me liaison with the
> > distributors so they have a single contact point.
> 
> We operate by informed consensus and I'm in favor of you going ahead
> with this, with RedHat as the first priority.

Thank you, and I agree that RH is #1.

> But wait for some others (such as Guylhem, our leader) to say OK
> too.

Will do. I should probably wait until Friday before I do anything to
give them a chance to chime in.

I'm taking off on vacation for three weeks at the end of this
week, so I likely won't do a whole heck of a lot during that time
anyway. I'll be in email contact, though, and will monitor this list.


> We've been (and are) making progress in improving the quality of our
> collection.  David Merrill recently classified a number of HOWTOs as
> unmaintained and Joy Goodreau is leading a review effort.  So it's a
> shame that just as we were making some progress in fixing our
> problems, RedHat dropped us.  Note that I've just proposed (in
> another post) that we provide a way for maintainers that want out to
> search for another maintainer: by putting such docs on a
> Wants-New-Maintainer list (or the like).

Maybe we should put together a list of new initiatives for improvement
I can take to the distributors?


-- 

Charles Curley                  /"\    ASCII Ribbon Campaign
Looking for fine software       \ /    Respect for open standards
and/or writing?                  X     No HTML/RTF in email
http://w3.trib.com/~ccurley     / \    No M$ Word docs in email

--> -->
 
 
<type 'exceptions.IOError'>
Python 2.5.2: /usr/bin/python
Wed Jul 3 14:55:32 2024

A problem occurred in a Python script. Here is the sequence of function calls leading up to the error, in the order they occurred.

 /opt/ezmlm-browse-0.20/<string> in ()
 /opt/ezmlm-browse-0.20/main.py in main()
  424 
  425         if path is not None:
  426                 main_path(path)
  427         else:
  428                 main_form()
global main_form = <function main_form at 0x8bf7c6c>
 /opt/ezmlm-browse-0.20/main.py in main_form()
  378         except ImportError:
  379                 die(ctxt, "Invalid command")
  380         module.do(ctxt)
  381 
  382 def main():
module = <module 'commands.showmsg' from '/opt/ezmlm-browse-0.20/commands/showmsg.pyc'>, module.do = <function do at 0x8c15cdc>, global ctxt = {'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}
 /opt/ezmlm-browse-0.20/commands/showmsg.py in do(ctxt={'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'})
   18         write(html('msg-pager') % ctxt)
   19         write('<hr>')
   20         sub_showmsg(ctxt, ctxt[MSGNUM])
   21         write('<hr>')
   22         write(html('msg-pager') % ctxt)
global sub_showmsg = <function sub_showmsg at 0x8bf71ec>, ctxt = {'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, global MSGNUM = 'msgnum'
 /opt/ezmlm-browse-0.20/globalfns.py in sub_showmsg(ctxt={'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msgnum=3001)
  229         format_timestamp(ctxt, ctxt)
  230         write(html('msg-header') % ctxt)
  231         rec_showpart(ctxt, msg, 0)
  232         write(html('msg-footer') % ctxt)
  233         ctxt.pop()
global rec_showpart = <function rec_showpart at 0x8bf71b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, msg = <email.message.Message instance at 0x8c740ec>
 /opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x8c740ec>, partnum=1)
  205                 else:
  206                         for p in part.get_payload():
  207                                 partnum = rec_showpart(ctxt, p, partnum+1)
  208         else:
  209                 write(html('msg-sep') % ctxt)
partnum = 1, global rec_showpart = <function rec_showpart at 0x8bf71b4>, ctxt = {'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, p = <email.message.Message instance at 0x8c7418c>
 /opt/ezmlm-browse-0.20/globalfns.py in rec_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x8c7418c>, partnum=2)
  208         else:
  209                 write(html('msg-sep') % ctxt)
  210                 sub_showpart(ctxt, part)
  211         return partnum
  212 
global sub_showpart = <function sub_showpart at 0x8bf7144>, ctxt = {'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part = <email.message.Message instance at 0x8c7418c>
 /opt/ezmlm-browse-0.20/globalfns.py in sub_showpart(ctxt={'cmd': 'showmsg', 'threadidx': 18, 'HTTP_X_FORW...HTTP_ACCEPT_ENCODING': 'gzip, br, zstd, deflate'}, part=<email.message.Message instance at 0x8c7418c>)
  164         type = ctxt[TYPE] = part.get_content_type()
  165         ctxt[FILENAME] = part.get_filename()
  166         template = html('msg-' + type.replace('/', '-'))
  167         if not template:
  168                 template = html('msg-' + type[:type.find('/')])
global template = <function template at 0x8befe9c>, global html = <function html at 0x8befed4>, type = 'application/pgp-signature', type.replace = <built-in method replace of str object at 0x8c752f8>
 /opt/ezmlm-browse-0.20/globalfns.py in html(name='msg-application-pgp-signature')
   40 
   41 def html(name):
   42         return template(name + '.html')
   43 
   44 def xml(name):
global template = <function template at 0x8befe9c>, name = 'msg-application-pgp-signature'
 /opt/ezmlm-browse-0.20/globalfns.py in template(filename='msg-application-pgp-signature.html')
   31         except IOError:
   32                 if not _template_zipfile:
   33                         _template_zipfile = zipfile.ZipFile(sys.argv[0])
   34                 try:
   35                         f = _template_zipfile.open(n).read()
global _template_zipfile = None, global zipfile = <module 'zipfile' from '/usr/lib/python2.5/zipfile.pyc'>, zipfile.ZipFile = <class zipfile.ZipFile at 0x8b88a7c>, global sys = <module 'sys' (built-in)>, sys.argv = ['-c', '/opt/ezmlm-browse-0.20']
 /usr/lib/python2.5/zipfile.py in __init__(self=<zipfile.ZipFile instance at 0x8c0458c>, file='-c', mode='r', compression=0, allowZip64=False)
  337             self.filename = file
  338             modeDict = {'r' : 'rb', 'w': 'wb', 'a' : 'r+b'}
  339             self.fp = open(file, modeDict[mode])
  340         else:
  341             self._filePassed = 1
self = <zipfile.ZipFile instance at 0x8c0458c>, self.fp = None, builtin open = <built-in function open>, file = '-c', modeDict = {'a': 'r+b', 'r': 'rb', 'w': 'wb'}, mode = 'r'

<type 'exceptions.IOError'>: [Errno 2] No such file or directory: '-c'
      args = (2, 'No such file or directory')
      errno = 2
      filename = '-c'
      message = ''
      strerror = 'No such file or directory'